Project EXI

The building of a Marlin 5EXi kit car, using a Seat Leon 1.8T 20v Donor
Main > Archives > 2011 > 07 >
< 07:41:39 >

Fri Jul 22 07:41:39 BST 2011

Rear lights


Fitted the last of the rear lights to the bodywork
Bolted the reverse and fog lamp to the rear, using one of the bolts that hold the hinge bar on. Then screwed the lamp housing to the support plate.
For the number plate light, i made a 60mm x 17mm hole in the body, so the light points down, to illuminate the number plate when it is fitted.
Thought about how to fit the high level brake light, I think I will secure this on top of the rear clam aluminium panel, I can then permanently fix the wire for this into the the brake ligh wiring on the rear.

Posted by Steve | Permanent link | File under: electrical