Project EXI

The building of a Marlin 5EXi kit car, using a Seat Leon 1.8T 20v Donor
Main > Archives > 2012 > 05 >
< 08:31:24 >

Sat May 5 08:31:24 BST 2012

Number plate fixings

Before I can take the car out onto the road, I have to fix the number plates to the chassis.
Staring with the rear 9"x7" square number plate, this was fairly straight forward. I reduced the size of the aluminium plate I made for this purpose down to slight smaller than the number plater, drilled 2 holes through the number plate, secured with colour caps and bolts and self adhesive sticky pads. Secured it all to the chassis.

The front was just as easy, this time I removed the aluminium panel and used the right angle brackets directly onto the front number plate. I may go back and decide to fit the aluminium panel again later.


Posted by Steve | Permanent link | File under: iva_and_registration