Project EXI

The building of a Marlin 5EXi kit car, using a Seat Leon 1.8T 20v Donor

2010 Archives

Main > Archives >
< 2010 >
Browse by date
December 2010 (6)
November 2010 (12)
October 2010 (12)
September 2010 (3)
August 2010 (15)
July 2010 (6)
June 2010 (3)
May 2010 (7)
April 2010 (21)
March 2010 (12)
February 2010 (13)
January 2010 (1)

Browse by entry
2010/12 - Fuse board relocated - electrical
2010/12 - Seats & Fuse board - interior, electrical
2010/12 - Roll cage - structual
2010/12 - Need to fit Heater Matrix - heating and cooling
2010/12 - Windscreen and Seats - interior
2010/12 - Turbo intercooler changes - heating and cooling
2010/11 - Heated windscreen - heating and cooling
2010/11 - First fitting of front clam shell, rear light fitting, seat mounts - bodywork, lighting
2010/11 - Seats ordered, fitting the Rear clam shell - bodywork
2010/11 - Roll cage manufactured wrong - structual
2010/11 - First fix of GRP side panels - bodywork
2010/11 - First fix of rear bulkhead GRP - bodywork
2010/11 - Side panels fitted to passenger side - bodywork
2010/11 - Fitted side panel extension for Accelerator box - bodywork
2010/11 - Side panel to house Accelerator extension - bodywork
2010/11 - Aluminium Side panels - bodywork
2010/11 - Module 3 collected from Marlin - bodywork
2010/11 - Module 3 ready for collection - bodywork
2010/10 - Brake line switch - braking, electrical, lighting
2010/10 - Longer Brake lines received - braking
2010/10 - Multi-way connectors for the instrument cluster fitted and working - electrical
2010/10 - Multi-way connectors for the instrument cluster - electrical
2010/10 - Handbrake / Rear Tunnel
2010/10 - Water Temp and Fuel level gauges - heating and cooling, interior
2010/10 - Brake and clutch line fitting - braking
2010/10 - Incorrect Tacho signal from ECU - interior
2010/10 - Fitting the speedo and tacho to Instrument plate - interior
2010/10 - Completed instrument plate for Dashboard - interior
2010/10 - Instrument plate for Dashboard - interior
2010/10 - Fuel sender gauge...............
2010/09 - Module 3 ordered, website and build diary now RAIDed - bodywork
2010/09 - Instruments have arrived - interior, electrical
2010/09 - Fuse Board cover - interior, electrical
2010/08 - New Rear brakes and caliper carriers
2010/08 - Stop lights, headlights, indicators, hazard and wiper switch wiring - braking, lighting
2010/08 - More startup , running better - powertrain
2010/08 - More startup, with new spark plugs fitted - powertrain
2010/08 - More startup, removing airlocks, fixing rough running - powertrain
2010/08 - Startup Day is.....today - powertrain
2010/08 - Panel warning lamp wiring
2010/08 - Raditor to engine pipework - heating and cooling
2010/08 - Radiator Mounts completed, Horn fitted, instruments connected - heating and cooling
2010/08 - Radiator Mounts painting - heating and cooling
2010/08 - Header tank mounted, Radiator Mounts finishing - heating and cooling
2010/08 - Radiator fan controller - heating and cooling
2010/08 - Radiator top Mounts - heating and cooling
2010/08 - Designing some Radiator Mounts - heating and cooling
2010/08 - Wiring, ECU connections, Center console, Radiator brackets - heating and cooling
2010/07 - Aftermarket Header Tank - heating and cooling
2010/07 - Wiring loom additions, Fuel hose adaptors, Header tank - electrical
2010/07 - Intercooler connecting the pipe work, Fuel pipe fitting
2010/07 - Intercooler connections silicon hoses
2010/07 - Intercooler connections over the gearbox
2010/07 - Fuse plate labelling - connecting main loom wires - electrical
2010/06 - Fuse plate wire crimping - electrical
2010/06 - Intercooler connections - heating and cooling
2010/06 - Where have I been.....
2010/05 - Connecting to the VAG loom - electrical
2010/05 - Rear Calipers wont take handbrake cable - braking
2010/05 - Stainless Coolant pipes received
2010/05 - Visited Marlin to collect some parts
2010/05 - Wiring loom frame - electrical
2010/05 - Center console switches - electrical
2010/05 - Stoneleigh Kit Car Show
2010/04 - HP Fuel pump location
2010/04 - HP Fuel pump mounting
2010/04 - ECU Mounting - ecu
2010/04 - Fitting Accelerator to pedal box bracket
2010/04 - Pedal box Accelerator bracket
2010/04 - Pedal box can be mounted lower now rack is further away
2010/04 - Steering column modification new mount point
2010/04 - Steering column too close to pedal box
2010/04 - Dashboard first fit - interior
2010/04 - Steering Rack modification
2010/04 - Gear Linkage cable too short!
2010/04 - Fitting Gear Linkage cables
2010/04 - Suspension mounting, alignment spacers - suspension
2010/04 - Tunnel Brackets
2010/04 - Rear Brakes caliper carrier from donor is required - braking
2010/04 - Rear Brakes caliper carrier wont fit - braking
2010/04 - Fitting Rear Brake discs - braking
2010/04 - Modifying the rear hub plates - braking
2010/04 - Rear bearings & uprights
2010/04 - Castle coombe
2010/04 - Driveshafts boots - powertrain
2010/03 - Driveshafts boots - powertrain
2010/03 - Relay and Fuse plate fixing - electrical
2010/03 - Connecting components on fuse plate with wires - electrical
2010/03 - Radiator and Intercooler - heating and cooling
2010/03 - Fxing components to the fuse plate - electrical
2010/03 - Fabricating the fuse plate - electrical
2010/03 - Fuse and relay plate - electrical
2010/03 - Removing the SAI combi valve
2010/03 - Removing the secondary air pump - Part 1
2010/03 - Understanding how to connect to the donor loom - ecu, electrical
2010/03 - Making the first wiring loom - electrical
2010/03 - Switches, relays and wires for loom have arrived - electrical, lighting
2010/02 - Fitting Battery plate - electrical
2010/02 - Rivnutting the front tunnel sections - structual
2010/02 - Front uprights - suspension
2010/02 - Painting the driveshafts - powertrain
2010/02 - Fitting the accelerator pedal
2010/02 - More on the rear uprights
2010/02 - More pedal box fitting
2010/02 - Front suspension - suspension
2010/02 - Conversatin with Mark
2010/02 - Fitting the rear suspension ball joints - suspension
2010/02 - Fitting the rear suspension - suspension
2010/02 - Fitting the steering rack - suspension
2010/02 - Fitting rear suspension - suspension
2010/01 - Understanding the donor wiring - ecu, electrical