Project EXI

The building of a Marlin 5EXi kit car, using a Seat Leon 1.8T 20v Donor
Main > Archives > 2010 > 05 >
< 00:00:00 >

May 09 2010

Stainless Coolant pipes received


Now I have collected the stainless coolant pipes, it was a great time to fit them, so I made 2 35mm holes in the front bulkhead so the pipes can run through the tunnel.
I also fitted the nearside gear linkage cable, this fitted well although I did have to 8mm of thread of each end to fit and alignment the ball socket joint to allow enough room to select all the gears. That worked fine and it is now possible to select ALL 6 gears + reverse.

Posted by Steve | Permanent link