Project EXI

The building of a Marlin 5EXi kit car, using a Seat Leon 1.8T 20v Donor
Main > Archives > 2009 > 12 >
< 00:00:00 >

Dec 12 2009

Pedal box fitting


After the engine went in, it was time to look at what comes next.
First off was to figure out how the steering column and pedal box will fit so
close to each other.
It seems the steering column needs to go between the brake pedal and the accelarator pedal, with the pedal box directly aligned with the front bulkhead uprights.
However I cant complete this until I have the steering rack from Marlin and in place on the car.

Posted by Steve | Permanent link